SPOTONAUTO

Serpentine belt replacement Guide2009 Nissan Rogue

Complete DIY repair guide with step-by-step instructions. Find exact parts on Amazon for your vehicle.

Difficulty

Easy

Time

15-25 minutes

Parts Needed

1 items

DIY Savings

$100-400+

2009 Nissan Rogue — What You Need to Know

  • QR25DE engine uses a 4-rib (not 6-rib) serpentine belt — verify Gates K040337 or Dayco 5040337
  • Belt replacement is easiest done from above with engine warm but off — rubber is more pliable when warm
  • 2008-2013 Rogue has power steering pump in belt routing (unlike later models with electric steering)
  • If squealing persists after new belt, test the AC compressor clutch and power steering pump pulley for bearing wear
Torque Specs

Tensioner mounting bolt: 26 ft-lbs

Belt Routing

Crankshaft pulley → spring tensioner → AC compressor → power steering pump → alternator. 4-rib belt. Tensioner rotates clockwise to release.

Safety Warnings

  • Note belt routing before removal — photograph the routing with your phone
  • Tensioner bolt rotates CLOCKWISE to release belt tension on Rogue

Tools Required

14mm wrench or socket (tensioner bolt)
Flashlight
Belt hook tool (optional)

Parts Needed

Serpentine Belt4 rib, 337mm effective length
OEM 11720-JG30AGates K040337 / Dayco 5040337
Shop on Amazon

Basic Procedure Overview

  1. 1Locate the spring-loaded belt tensioner on the passenger side of the engine
  2. 2Insert 14mm wrench on tensioner bolt and rotate CLOCKWISE to release tension
  3. 3Slip belt off the alternator pulley and remove — keep tensioner held open
  4. 4Route new belt: crankshaft → tensioner → AC compressor → power steering → alternator
  5. 5Slip belt over alternator while holding tensioner open, slowly release
  6. 6Visually verify belt is seated in all pulley grooves, start engine to check
Pro Feature

Get the Full AI-Powered Repair Guide

Exact torque specs, part numbers, wiring diagrams, and step-by-step instructions tailored to your 2009 Nissan Rogue.

Pro members get unlimited AI guides for every vehicle in their garage — plus OBD-II scanner integration and PDF downloads.

Cancel anytime · 14-day money-back guarantee

Consulting service manuals...

Generating your personalized repair guide

About Serpentine belt replacement on Nissan Rogue

Performing a serpentine belt replacement on your 2009 Nissan Rogue is a common maintenance task that most DIY mechanics can handle with basic tools. By doing this repair yourself, you can save $100-400 compared to dealership or shop prices.

The Nissan Rogue has been in production for many years, and serpentine belt replacement procedures are well-documented. Always refer to your owner's manual for vehicle-specific information and torque specifications.

Where to Buy Parts

We recommend purchasing parts through Amazon for fast Prime shipping, competitive prices, and easy returns. All part links include your vehicle fitment information for accurate results.

Related Repairs for Your Nissan Rogue

Serpentine belt replacement Guides for Other Vehicles