Headlight bulb replacement Guide2013 GMC Yukon

Tools Required

Parts Needed

Basic Procedure Overview

1. 1Access bulb from engine bay or wheel well
2. 2Disconnect electrical connector
3. 3Remove retaining clip or ring
4. 4Remove old bulb
5. 5Install new bulb without touching glass
6. 6Reconnect and test

Frequently Asked Questions

How much does headlight bulb replacement cost for a 2013 GMC Yukon?

DIY headlight bulb replacement on a 2013 GMC Yukon costs approximately $15-80 in parts. A professional shop typically charges $95-280 including labor. By doing it yourself, you save $80–$200+ in labor costs.

How long does headlight bulb replacement take on a 2013 GMC Yukon?

A headlight bulb replacement on a 2013 GMC Yukon typically takes 10-30 minutes for a DIY mechanic. Professional shops may be faster due to lifts and pneumatic tools. First-timers should add 30–60 minutes for setup and learning.

Can I do headlight bulb replacement myself on a 2013 GMC Yukon?

Yes, a headlight bulb replacement on a 2013 GMC Yukon is rated Easy and is a great beginner DIY project. You'll need basic hand tools and about 10-30 minutes.

What tools do I need for headlight bulb replacement on a 2013 GMC Yukon?

For headlight bulb replacement on a 2013 GMC Yukon you'll need: Gloves, Screwdriver (possibly). You'll also need the correct replacement parts: Headlight bulb (correct fitment).

What happens if I delay headlight bulb replacement on my 2013 GMC Yukon?

Driving your 2013 GMC Yukon with a burned-out headlight is a safety hazard and a ticketable offense in most states. Reduced visibility increases accident risk, especially at night and in bad weather.