Battery replacement Guide2015 Nissan Rogue
Complete DIY repair guide with step-by-step instructions. Find exact parts on Amazon for your vehicle.
Difficulty
Easy
Time
15-20 minutes
Parts Needed
1 items
DIY Savings
$100-400+
2015 Nissan Rogue — What You Need to Know
- →Group 35 battery — positive terminal faces toward the FRONT of the engine bay on the Rogue
- →No battery coding or registration needed — just swap and go
- →Nissan Intelligent Key system may need re-sync after battery change: hold unlock button on key fob near door handle for 3 seconds
- →If CVT warning light appears after battery change, it will self-clear after a few drive cycles
Torque Specs
Terminal clamp bolts: 4-6 ft-lbs | Hold-down bolt: 10 ft-lbs
Safety Warnings
- •Disconnect negative (black) terminal first to prevent shorts
- •No battery registration or coding required on Nissan Rogue
Tools Required
10mm socket and wrench
Parts Needed
BatteryGroup 35, minimum 550 CCA
Shop on AmazonOEM 24410-JG200Optima 35 / Interstate MTP-35 / DieHard Gold 35
Basic Procedure Overview
- 1Locate battery under hood on driver side
- 2Disconnect 10mm negative terminal, then 10mm positive terminal
- 3Remove the 10mm battery hold-down bolt and clamp at the base
- 4Lift out old battery — note positive terminal faces toward front of vehicle
- 5Install new Group 35 battery in same orientation
- 6Connect positive terminal first, then negative — torque to 4-6 ft-lbs
Pro Feature
Get the Full AI-Powered Repair Guide
Exact torque specs, part numbers, wiring diagrams, and step-by-step instructions tailored to your 2015 Nissan Rogue.
Pro members get unlimited AI guides for every vehicle in their garage — plus OBD-II scanner integration and PDF downloads.
Cancel anytime · 14-day money-back guarantee