Spark plug replacement Guide2016 Nissan Rogue
Complete DIY repair guide with step-by-step instructions. Find exact parts on Amazon for your vehicle.
Difficulty
Easy
Time
30-45 minutes
Parts Needed
1 items
DIY Savings
$100-400+
2016 Nissan Rogue — What You Need to Know
- →QR25DE engine uses 4 plugs with individual coil-on-plug (COP) ignition — one coil per cylinder
- →OEM NGK ZFR5F-11 gap is 0.043 inch — verify with feeler gauge before installing
- →Factory service interval is 105,000 miles for iridium plugs, but 60,000 miles recommended for performance
- →Misfire codes P0300-P0304 on Rogue are often caused by worn plugs or faulty coil packs
Torque Specs
Spark plugs: 15-20 ft-lbs | Coil bolts: 7 ft-lbs
Safety Warnings
- •Work on cool engine only
- •Do not overtighten plugs
- •Check and set gap if required
Tools Required
5/8" spark plug socket
10mm socket (coil bolts)
Torque wrench
Gap gauge
Parts Needed
Spark Plugs (set of 4)Gap: 0.043 inch — pre-gapped, verify before installing
Shop on AmazonOEM 22401-JA01BNGK ZFR5F-11 (NGK 5174) / Denso SKJ20DR-M11
Basic Procedure Overview
- 1Remove engine cover (plastic clips)
- 2Disconnect each ignition coil: unplug connector, remove 10mm bolt, pull coil straight up
- 3Blow compressed air around plug hole before removing to prevent debris entering cylinder
- 4Remove plug with 5/8" socket — break loose slowly (may be tight after extended service)
- 5Check gap on new plug (0.043") and adjust if needed
- 6Thread new plug in by hand, torque to 15-20 ft-lbs
- 7Apply dielectric grease inside coil boot, reinstall coil
Pro Feature
Get the Full AI-Powered Repair Guide
Exact torque specs, part numbers, wiring diagrams, and step-by-step instructions tailored to your 2016 Nissan Rogue.
Pro members get unlimited AI guides for every vehicle in their garage — plus OBD-II scanner integration and PDF downloads.
Cancel anytime · 14-day money-back guarantee