💡Headlight Bulb Size
Mitsubishi Lancer Headlight Bulb Size
Find the correct headlight bulb size for your Mitsubishi Lancer. Covers low beam, high beam, fog lights, and turn signals for all years.
Quick Answer
The Mitsubishi Lancer headlight bulb size depends on the model year and trim. Common sizes include H11 (low beam), 9005/HB3 (high beam), and H16 (fog lights) — see the full breakdown below.
2012-2017
2012-2017Low BeamH11 or H7
High Beam9005/HB3
Fog LightsH16, H11, or 9006 (if equipped)
Turn Signal (Front)7440/T20 or 3157 amber
Headlight TypeHalogen projector or reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →LED upgrade bulbs are available but may cause CANBUS errors on some models
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
2006-2011
2006-2011Low BeamH11 or H7
High Beam9005/HB3
Fog LightsH16, H11, or 9006 (if equipped)
Turn Signal (Front)7440/T20 or 3157 amber
Headlight TypeHalogen projector or reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →LED upgrade bulbs are available but may cause CANBUS errors on some models
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
2000-2005
2000-2005Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1994-1999
1994-1999Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1988-1993
1988-1993Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1982-1987
1982-1987Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1976-1981
1976-1981Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
1973-1975
1973-1975Low Beam9006/HB4 or H4
High Beam9005/HB3 or H4
Fog Lights9006 or 880/881 (if equipped)
Turn Signal (Front)3157 amber
Headlight TypeHalogen reflector
Notes
- →Never touch halogen bulbs with bare fingers — skin oil causes hot spots and premature failure
- →Replace bulbs in pairs — if one side burned out, the other is likely near end of life
Frequently Asked Questions
- What size headlight bulb does a Mitsubishi Lancer use?
- The Mitsubishi Lancer headlight bulb size varies by year. Newer models often use factory LED units, while older models use H11, H7, or 9006 halogen bulbs. Check the year-specific specs below for your exact fitment.
- Can I put LED bulbs in my Mitsubishi Lancer?
- If your Mitsubishi Lancer has halogen headlights, you can install LED replacement bulbs. Look for bulbs with a proper beam pattern (projector-compatible) to avoid blinding other drivers. Some models may need anti-flicker adapters.
- How do I replace the headlight bulb on a Mitsubishi Lancer?
- On most Mitsubishi Lancer models, you can access the headlight bulb from behind the headlight assembly in the engine bay. Twist the bulb socket counterclockwise, pull out the old bulb, insert the new one (don't touch the glass), and twist back in.
- Why does my Mitsubishi Lancer headlight keep burning out?
- Frequent bulb burnout on the Mitsubishi Lancer is usually caused by a loose connection, moisture in the housing, touching the bulb glass during installation, or a voltage regulator issue. Check the connector and housing seal.
More Mitsubishi Lancer Guides
🛢️Mitsubishi Lancer Oil Type & Capacity🔋Mitsubishi Lancer Battery Location🔘Mitsubishi Lancer Tire Size💡Toyota Camry Headlight Bulb Size💡Toyota Corolla Headlight Bulb Size💡Toyota RAV4 Headlight Bulb Size💡Toyota Highlander Headlight Bulb Size💡Toyota Tacoma Headlight Bulb Size💡Toyota Tundra Headlight Bulb Size